276°
Posted 20 hours ago

Thermaltake Tower 900 Black Edition Tempered Glass Fully Modular E-ATX Vertical Super Tower Computer Chassis CA-1H1-00F1WN-00

£64.995£129.99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Unparalleled Cooling AbilityThe Tower 900 has the capability to deliver excellent cooling efficiency, and enables users to build extreme air/liquid cooling systems with high-end, large graphics cards, treated by DIY/AIO liquid-cooling systems and air-cooling units. Supporting up to dual 560mm liquid cooling radiators, cooling possibilities just got real. Most uniquely, the right side and left side of the case are designed with various mounting points for radiators to provide proper space and placement when building DIY/AIO configurations. Attached is a pic and arrows pointing to one of my most hated features of this case. Sure, plenty of cable and water tube routing options, but everything is so offset and it'll just be ugly trying to fit the cables and tubes to fit these pre-made holes. The most important factor of any case is thermal performance. It's going to need to ensure enough airflow hits your components and heatsinks or radiators. Thermaltake has been known to come a little short with regards to this, but the Tower 900 shows just how capable the company is. It's a brilliantly designed chassis.

You may also want to think about what coolant you are going to use before considering tube or reservoir material as some may stain or cloud some materials. Welcome to the ShowcaseThe entire design of the Tower 900 showcases it's system presentation to enthusiast looking for a streamlined presentation. Unlike most cases on the market, The Tower 900 eliminates the issue with “GPU SAG” allowing vertical mounting of multi-GPU configurations on an E-ATX platform. Constructed with a chamber concept design, isolation of high capacity radiators allows additional interior space without compromising on maximum cooling performance. Capable of supporting dual-loop liquid cooling systems with modular capabilities allowing endless configurations, take on The Tower for your next showcase. Drive Bays: Accessible : 1 x 5.25’’ / Hidden: 6 x 3.5’’ or 2.5’’ (With HDD Cage), 2 x 2.5’’ (With HDD tray) Tt LCS CertifiedTt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

Pump: EK-XTOP Revo D5 PWM Acetal - (incl. pump) (total of 2) (for redundancy and extra push on 480mm rads) Clearance: CPU cooler height limitation: 260mm / VGA length limitation: 400mm / PSU length limitation: 220mm Personally I think it's worth going for borosilicate as it's going to remain clear over the long term and is easy to clean. so could anyone knowing the parts i have recommend a good decent res and pump combo that would be top notch for the system and reliability is key with performance second both if possible that's good to cool a high spec rig

Inside the front portion, you can install up to two 140mm blowers. In the rear section of the Tower 900, it's possible to add a further 11. Yes, 11 fans, bringing the total up to 13. For radiators, the Tower 900 can handle up to 560mm (four 140mm fans) or 480mm (four 120mm fans). One can be attached to both the left and right sides, though you will need to remove the pre-installed HDD cage. My main piece of advise though would be to think about expandability and maintenance in advance and what your drain, fill and bleed routine would look like. great case seems pretty tough and well worth the money, but issue i found was there isnt really any where for the reisvoirs/pumps to bolt down so i had to drill the hole's myself, and the power cables are a little difficult because the tight gap but apart from that its a really great case with loads of space for everything else. Hey all, so it's been about 10 years since I've built a full system, so forgive me if I'm leaving anything out or not doing it right (I'm sure you'll be more than happy to let me know if i'm not lol) Motherboards: 6.7” x 6.7” (Mini ITX) / 9.6” x 9.6” (Micro ATX) / 12” x 9.6” (ATX) / 12” x 13” (E-ATX)

Recently Viewed

In terms of fittings you'll need to decide on whether you go hard line or soft tubing, fittings tend to be for one or the other, but you can have both hard and soft tubing in the sand loop, but the appropriate fittings need to be used for the appropriate tubing type.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment