276°
Posted 20 hours ago

frient Intelligent Smoke Alarm | Wireless Fire Sensor | Instant Notification | EN 14604 | Battery-Powered | Consumer Electronics | Zigbee | Works with SmartThings and Homey

£9.9£99Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

Another reason is that developers do not understand the zigbee specification, are resistant to changing an existing implementation (admitting they are wrong, spend more time than planned, …). I remember though discussions with pairs.

Testing is mainly done against the internal coordinator or a single selected coordinator (cost reasons related to time) and improved only when there is a market need (a customer using another coordinator wants to integrate your end device). An LED rings the middle of the alarm and changes color based on the alarm's status. Green and blue indicate that the alarm is starting up or in pairing mode. Yellow means there's a malfunction or a low battery, while red means there's a fire or smoke condition. However, despite the protocol's popularity, there are still certain issues buyers need to be aware of before purchasing a Zigbee smart smoke detector. For instance, when it comes to smart smoke detectors, Zigbee is generally not the protocol of choice. Wi-Fi smoke detectors are much more common, like the Nest Protect. I understand you. But to my knowledge, there isn’t any smoke alarm what you can silence remotely. See the reasons above in my previous post.

How can we help you?

Why you can trust Android Central Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test. dev:4252022-12-21 11:07:11.379 PM debugSmoke Detector sendZigbeeCommands (cmd=[he raw 0xDBF9 1 0x01 0x0000 {10 00 00 04 00 00 00 01 00 05 00 07 00 FE FF}, delay 200]) IMPORTANT:It’s absolutely crucialthat you have a robust and well-rounded ZigBee Mesh Networkto ensure the correct operation of the Heiman Smoke Detector. Because this device is battery powered, it acts as an end device instead of a router. It’s placement in ceilings and corners extends the range of sending the ZigBee payload, so to make sure it does not fail in the case of an emergency, you need to solidify your ZigBee Mesh by adding as many routers as you can. Verdict

You should have at least one smoke detector on every level of your house, and inside and outside of every sleeping area. Smoke detectors should be mounted high up on a wall or on the ceiling. How often should you replace your smoke detectors? Easy to integrate with Home Assistant (out of the box, without using complex scripting, MQQTT or such things) This guide is mostly about SmartThings, but I had to point out one more highly recommend one: The Nest Protect.

I can see that in principle the smoke detection is functionally present, but at the same time it is not reported to be functional. IMPORTANT:Besides CE and RoHS, it’s important to note that this smoke sensor is EN14604certified. This certificate represents a standard for wireless smoke detectors which is a mandatory requirement for residential protection in the European Union.

dev:4252022-12-21 10:55:06.815 PM debugSmoke Detector description is read attr - raw: 038601000108210020C8, dni: 0386, endpoint: 01, cluster: 0001, size: 08, attrId: 0021, encoding: 20, command: 0A, value: C8 dev:4252022-12-21 10:58:30.163 PM debugSmoke Detector description is catchall: 0000 0013 00 00 0040 00 CC2E 00 00 0000 00 00 832ECC92CFCCFEFF72025C80 Meanwhile there is a real situation, but you turned off the alarm in the low level state, and things get worse in a few minutes and alarm goes into a full blast smoke alarm state. That few minutes is enough to burn down a whole room. Or the CO to kill somebody in sleep.

dev:4252022-12-21 10:54:41.673 PM infoTuya Multi Sensor 4 In 1 Received bind response, data=[4F, 00] (Sequence Number:4F, Status: Success) dev:4252022-12-21 10:55:07.091 PM infoSmoke Detector Debug logging will be automatically switched off after 24 hours The Heiman Smoke Sensor proved to be an excellent fire detection device you can trust. In my tests, I tried to replicate real-life scenarios of burning different materials to produce different kinds of smoke. It did not fail once to detect smoke and alert Home Assistant. dev:4252022-12-21 10:58:30.235 PM debugSmoke Detector Desc Map: [raw:CC2E01000064040042105F54595A4230315F64736A737A7030780000002003010000204005000042065453303230350700003003FEFF86, dni:CC2E, endpoint:01, cluster:0000, size:64, attrId:0004, encoding:42, command:01, value:_TYZB01_dsjszp0x, clusterInt:0, attrInt:4, additionalAttrs:[[value:03, encoding:20, attrId:0000, consumedBytes:4, attrInt:0], [value:40, encoding:20, attrId:0001, consumedBytes:4, attrInt:1], [value:TS0205, encoding:42, attrId:0005, consumedBytes:9, attrInt:5]]]

Although it delivered different results with variable time frames, it did not fail to detect smoke in any scenario.Keep your family safe with this battery operated Zigbee smoke alarm. The detector is equipped with the latest Zigbee protocol to make you alerted of the danger via Smart Life app on your phone wherever you are. The sensor can also be used in Smart Life automation scenarios e.g. switching off your gas supply (using our WIFI Smart Shut-Off Valve) when the smoke is detected. You apparently found the automatically closed github topic for the HS1AS-E https://github.com/zigpy/zha-device-handlers/issues/518 .

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment