Posted 20 hours ago

Mirka paint scraper scraper blade -Shark Blade- for removing paint runs and noses / paint scraper for car paint and wood

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product.

I did not go after Festool Denibber (LZK-HM 497525) not because it's bit more expensive but found info here that Mirka is more beginner friendly and sufficient for hobby use regarding tool life span.

If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. Gently push the sharp chamfered edges against the paint blemish whilst the blade is at an almost horizontal angle to remove in one sweep. With my new car, I decided to go for little more safer approach in flattening/cutting/shaving raised areas and bought Mirka Shark Blade. It's all too easy when sanding down a run to go through the paint layer either side, but by using this little tool you can shave off the high spot with ease.

I did not go further with flattening the area since I noticed that orange peel effect on sanding area is becoming less noticeable than on surrounding area. Have been lurking for ages and joined forum some time back but never wrote anything since vast majority of forum population do not have much to learn from me or my "rich" experience in detailing. It is made of carbide steel, as used in drill bit tips, which enables the edges of the Shark Blade to keep their sharpness and cut through debris for many years. Unfortunately we aren’t able to send parcels to these addresses at present but we are working on it. The Mirka Sharks Blade Denibbing Tool is a minature solid tungsten carbide de-nibbing tool for quickly and easily removing paint drips, runs, sags and dirt from smooth surfaces.To better understand how it works, imagine having the cutting power of a razor, without the flexibility issues associated with a thin blade. Just by lightly drawing the blade across the surface, you can remove the blemishes then wet sand and buff to a perfect surface. By purchasing this product from JB Tools, the manufacturers’ warranty, if any, potentially associated with the product may not be honored by the manufacturer. Use this handy little tool to smooth blobby paint touch-ups, remove dirt nibs, or precisely deal with small paint defects. I found few instructional videos for Festool Denibber and how to place it to rest on the matching cord to achieve optimal cutting angle.

One issue you'll notice is that they are super sharp to start with, after use it will blunt off and become nice to use. I attached two photos of the area that I started to cut but stopped after few cuts because I noticed slight cutting marks (blurring) on surrounding non touched-up area. On other hand, haven't found any video instruction or user manual for proper Mirka Shark Blade handling. New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging .In the interest of sustainability and reducing waste, here at Sprayman UK we do reuse our cardboard boxes. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). Tried to take a photo of repaired area but couldn't get right angle of camera to catch (probably) final result. NID cookie, set by Google, is used for advertising purposes; to limit the number of times the user sees an ad, to mute unwanted ads, and to measure the effectiveness of ads.

The Mirka Shark Blade Scraper / De-Nibber is capable of precisely removing dirt nibs and high spots, in a few quick passes. Although it's mainly used in auto and marine paint repair, it's found a home with fine decorators who specialize in hand and spray painted furniture and fixtures. Please notice skewed reflection on car's front bumper which is caused by slight vertical flat spot (pit) caused by denibber.The Shark Blade is made of carbide steel (similar to the metal used to make the cutting portions of drill bits, router bits, and radial saw blades). Cut the clear with denibber but after 7-10 days of curing since any sooner will probably pull all the filling out. Read more about the condition New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable).

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment