English French German Portuguese Spanish

G59-3-1-Relay-Testing

G59/3-2 Protection Relay Panel Testing


Please be aware that G59/3-2 is now being used by most DNO Witness’s so your test and your control panel must comply with these recommendations. We have worked with most of the DNO engineers in the field and because of this we can provide a reliable testing service, and the correct test and test results which are much more exacting than the old tests.
Our Test Engineer is also the only person in the UK to train electricans to become G59/3-2 Test Engineers.

If you require a G59/3-2 Protection Relay Panel please check out the G59/3-2 Panel Page for a high quality handmade bespoke G59/3-2 Protection Relay Panel.

Get in touch for more information and details on;
01260-545085
or
This email address is being protected from spambots. You need JavaScript enabled to view it.


Here at Renewable Solution we are also pleased to be able to offer our clients a G59/3-2 Testing service. As one of the few companies in the UK who are certified to offer this service we and our team of engineers can come to site to test your G59/3-2 Panel. We will complete the set of tests required to prove to the DNO that your system falls within the requirements of the G59/3-2 Regulations. After these tests have been carried out successfully you are able to turn your system on.

Testing New 1
 
LV Testing
Testing New 2
 
HV Testing

Testing New 3
 
Thermal Imaging Testing
 
 
 

We have a team of engineers who are all trained in house to the highest standard. This means that when you book us to come and test your G59/3-2 protection relay panel we will be sending an engineer who is of the highest competency.
Please see below some of the test equipment we use to carry out the required tests.

DVS3-HP-Three-Phase-Digital-Voltage-Source
 
We have completed many tests with a DNO witness as well as tests where the DNO have not been present.

If we are also supplying your G59/3-2 protection relay panel you will also qualify for a discounted rate, please get in touch for prices and more info.
Whatever the technology behind your G59/3-2 protection relay panel we can test it from a PV array to a large scale Generator.

commisioner

The Main areas we are required to test to prove your system falls within the G59/3-2 Recommendations are;

  • Over Voltage (stage 1 & 2)
  • Under Voltage (stage 1 & 2)
  • Over Frequency (stage 1 & 2)
  • Under Frequency (stage 1 & 2)
  • Vector Shift
  • ROCOF (Rate Of Change Of Frequency)
  • LOM (Loss Of Mains)

So if you are installing a system or about to install a system that requires a G59/3-2 Protection Relay Panel get in touch and we will be more than happy to help with providing a Test Engineer for you.

Click Here To Contact Us

Copyright © 2012-2016 Renewable Solution Ltd  All rights reserved
Company Registered in England & Wales No 8374129